The construction process of carbon crystal panels is simple, and the construction technology mainly reflects in how the panels are spliced and how the internal and external corners are closed.
1. Wall treatment
The wall surface is leveled with wooden boards or wooden strips (keels) as the base, and the wooden strips (keels) are used for leveling. Pay attention to the distance between the wooden strips not being too large.
2. Install carbon crystal plate
Apply structural adhesive to the back of the carbon crystal board, using a horizontal and vertical line around the board with a thickness of approximately 1cm.
3. Wall treatment
Use a spirit level to test that the edge of the board should be parallel to the horizontal line. If it is not parallel, move the board to adjust its parallelism and evenly tap the carbon crystal board with a glue hammer to make it tightly adhere to the wall.
4. Embedded metal I-bar
After the first board is fixed, metal I-shaped lines are embedded on the side of the board, fixed with F25 straight nails, and the second board is installed in sequence. If the carbon crystal plate has already opened the mother and child slots in advance, it can be directly spliced without the need for metal strips to be closed.
Post time: Jan-21-2026